Emotron AFE - Active Front End Drives
Emotron Active Front End drives are available in two versions: Low harmonic drives and Regenerative drives. Both are based on standard Emotron AC drives, offering the same reliability, easy handling and advanced functionality. The drives are delivered as complete solutions in IP54 classified cabinets. – ‘Cost-efficient and trouble-free operation with AFE’.
specification
RANGE : 55 – 1,000 kW
STANDARD : IEC,OTHER
POWER : 380-690 V, 3-Phase
Emotron VFX - AC Drives
Emotron VFX 2.0 AC drive optimizes the operation of your cranes, crushers, mills and mixers. Your process is protected from damage and downtime and you will benefit from reduced installation, energy and maintenance costs. ‘High dynamics for demanding applications’.
specification
RANGE : 0.75-3,000 kW & 11-132 kW – IP20
STANDARD : IEC
POWER : Up to 690 V & Up to 480 V
Emotron FDU - AC Drives
Emotron FDU 2.0 AC drive optimizes the operation of your pumps, fans, compressors and blowers. Your process is protected from damage and downtime, and you will benefit from reduced installation, energy and maintenance costs. ‘Secure the flow and save energy’.
specification
RANGE : 0.75-3,000 kW & IP20
STANDARD : IEC
POWER : Up to 690 V & Up to 480 V
Emotron VSX
Dynamic drives for Low Power IM & PMSM motors: Emotron VSX Series Drives offer customised solutions for your required application in an incredibly compact design with technologically advanced package capable of driving Induction and Permanent magnet motor. The LCD graphical display offers user-friendly interface and set up will have your system up and running in time.
Emotron VSX is general purpose drive for variable and constant torque application. With its V/f and sensorless vector control mode Emotron VSX is suitable for variety of applications like fan, pump, compressor, conveyor, crane, mixer, SPM and other similar machineries.
specification
RANGE : 0.75kW-22kW
STANDARD : IEC
POWER : 380–415Vac/50Hz ,3 Phase
Emotron VSM
Simple to use & suitable for standard applications: VSM AC Drive will meet all of your standard requirements in this fast evolving world of automation. VSM will not only save energy but is also easy to operate, a quick fix for commissioning.
Emotron VSM is cost effective, safe & energy efficient solution for the demanding industrial environment. VSM drives offers high level of reliability & productivity for process owners and is suitable for applications like fan, pump, blower, compressor etc.
specification
RANGE : 0.75 – 3.7kW
STANDARD : IEC
POWER : 380 – 480 V, 3 phase
Emotron VSR Solar Drive
Efficient and user-friendly operation for solar pumping: Suraj – Emotron VSR series drives offer reliable, cost-efficient and user-friendly operation. Soft start of pumps can avoid water hammer and improve lifetime of the system. The Emotron VSR series has been specially developed for solar water pumping. Built-in self-adaptive high accuracy maximum power point tracking (MPPT) algorithm of VSR ensures maximum water flow output. The compatibility of VSR with ac as well as dc input gives user the flexibility to optimize the operation and improve reliability of operation. The function of dormant state at weak light, wake up at strong light, high water level dormant state, under-load pre-warning and other control protection functions can ensure normal operation of water pumps under changing operating conditions. Thanks to variety of specially designed features of VSR, it is truly the answer to your needs.
specification
RANGE : 0.4 kW – 7.5 kW
STANDARD : IEC, OTHER
POWER : 220VAC, 1 Ph or 310VDC & 380VAC, 3 Ph or 540VDC
Emotron MSF 2.0 Softstarter
Emotron MSF 2.0 softstarter offers optimized start and stop sequences, advanced braking techniques and built-in monitor functionality. The softstarter is developed for pump, fan, compressor, blower, crusher, mill, mixer and saw applications. Soft starts – smart stops.
Smooth starts reduce your costs
Efficient torque control ensures an ultra-smooth start with constant acceleration. Reduced start currents and mechanical stress means lower installation, energy and maintenance costs. Torque boost can be used to overcome initial torque peaks when starting, for example, a loaded crusher.
specification
RANGE : 7.5 kW to 1600 kW
POWER : 200 V to 690 V
Emotron TSA
Starts. Stops and Protects. Emotron TSA softstarters take motor control to a new level. Soft torque starting, intelligent load monitoring and smart stops are all included and accompanied by a robust and compact design. The softstarter is developed for pump, fan, compressor, blower, crusher, conveyor, mill, mixer and saw applications.
Smooth starts reduce your costs
Adjusting the motor torque is best done by controlling the current in all three phases. 3-phase control offers symmetrical and balanced currents without the drawbacks of additional energy losses, noise and vibration normally connected with 2-phase softstarters.
specification
RANGE : 7.5 – 1,800 kW
Emotron M20 Shaft Power Monitor
Reliable and cost-efficient monitoring: The Emotron M20 shaft power monitor protects your pumps and other equipment against damage and downtime. Early warnings allow for preventive action, thus reducing maintenance costs and increasing reliability. Using the motor as a sensor also reduces installation costs.
Unique shaft power monitoring
The Emotron M20 immediately detects over- and underload due to, for example, a pump running dry or a crusher jamming. A unique technique to calculate shaft power results in an accurate and reliable supervision across the whole load range.
HMI
Emotron Emosmart series HMI is based on a modern,powerful & user Friendly design having high quality display resolution,large memory and a powerful configuration that can esily achieve the human-machine interaction in various fields and industrial automation.
PLC
Emotron EmoLog series is a high perfomance compact type Programmable Logic Controller (PLC) for your automation process. It can be widely applied in manufacturing industries including SPM, textile, chemical fiber, machine tool, cables, food and beverages, packaging, plastic steel, construction machinery,air conditioner, elevator printing and many more.